Start with the appliances your household needs most. For many Gold Coast homes, that might be the fridge and a few lights. For others, an essential water pump is higher on the list. A generator connected to your home doesn't mean everything can run at once.
Make a short list before buying a generator or asking about a changeover switch. It’s easier to assess the equipment you want to use together than to size backup power by the number of bedrooms.
Sort your appliances into three groups
Priority: Equipment you particularly want available, such as the fridge, a few lights or an essential water pump.
Occasional: Equipment you'd like to use briefly, if your assessed setup allows it.
Can wait: Appliances you’re comfortable leaving off until normal power returns.
Talk it through with the people who live in the home. One person’s essential might be someone else’s optional extra. Don’t automatically include the oven, electric hot water, air conditioning or EV charging. If you want any of these backed up, put them on the list for assessment rather than assuming they’ll be covered.
Essential Energy’s domestic generator guide also recommends focusing on essential loads such as refrigeration, lights and pressure pumps.
Make a worksheet from the actual appliances
For each priority item, write down the appliance name and model, its electrical input from an accessible label or manual, and any starting-power figure the manufacturer provides. Note what else needs to run alongside it and whether it plugs in or is permanently connected.
Use electrical input, not an advertised output figure. If the label is hard to reach, look up the manual rather than moving a heavy appliance or removing a cover. An unknown starting requirement is something to check, not a zero on the worksheet.
The Queensland Electrical Safety Office’s appliance power guide explains why actual ratings matter: a motor or compressor can need much more power to start than to keep running. Its example figures are not specifications for your appliance.
Check what happens when a fridge starts
Consider a hypothetical fridge that takes 200 W to run and 1,200 W to start. If your other selected equipment needs 300 W, that adds up to 500 W while the fridge is running, but 1,500 W during the assumed start.
That’s why adding up running figures alone can understate the demand. A fridge can cycle back on while you’re using another appliance, so leaving a gap when you first switch things on doesn’t necessarily prevent overlapping loads. Keep occasional loads separate where your operating plan allows, and have the actual appliance combinations and generator limits assessed. The numbers above are an illustration, not a sizing recommendation.
Know what the changeover switch does
A correctly installed changeover arrangement separates the generator supply from the electricity network. It doesn’t add generator capacity. Which circuits are available and which appliances can be used together are two different questions. Ask your electrician to explain both.
A licensed electrician is needed to connect a generator to fixed household wiring. Never try to supply your home through an ordinary power point or an improvised lead. The Queensland Electrical Safety Office warns against backfeeding because it can endanger network workers and neighbours.
Already own a generator? Bring its exact model and manual. Read our guide to using an existing generator with a home changeover switch before assuming the equipment is compatible.
Plan an outdoor location before the outage
Queensland Health’s generator safety guidance advises operating petrol and diesel generators outdoors, away from openings where exhaust could enter. Never run one in a garage, carport or other enclosed or partly enclosed space, even with the doors open. Carbon monoxide can’t be seen or smelt and can be fatal.
Keep the generator dry, follow its instructions and let it cool before refuelling. Work out suitable placement ahead of time rather than improvising when the weather turns.
Common questions
Can the fridge and lights stay on while I use a kitchen appliance?
That depends on their combined demand, the fridge’s starting requirements and your setup. Include the kitchen appliance as an occasional load and ask which combinations are suitable.
Does a larger changeover switch let me run more?
Not by itself. The generator and the rest of the installation still limit what can be supplied.
Get your essentials list checked
If you’re planning backup power for a Gold Coast home, tell us your suburb, what you want to run together and the model of any generator you already own. See KeenSpark’s generator changeover switch service and use the enquiry form on that page to get started.